Test item only. Useful if adding items to the order if we dont have them...
Brand new 12v 9AH cell, perfect for rebuilding UPS battery banks.
1.8M 10A lead for plugging devices into your UPS
Brand new 12v 4.5AH cell, perfect for rebuilding UPS battery banks.
CompaQ / Deltek R3000h - 3000VA 48VDC UPS.
These are great UPS with a large battery bank and old school electronics with great airflow. They are amongst the most reliable, and because it uses an array of 6v cells rather than the usual 12v we find that the cell bank lifespan is longer than other UPS (including those with "battery saving tecnology").
Warning: Last items in stock!
Fully tested and operationally perfect Compaq R3000h UPS, in mint condition with new batteries installed.
The UPS comes with a full 12 month RTB warranty. We have replaced the batteries with brand new units. The battery is a large component of the overall cost of a UPS. They last between 3 and 5 years, so if you buy a unit with "unknown quantity" cells you may have to replace them immediately or shortly. With our units you do not need to worry about this as new batteries have been installed by us before we send the unit.
Because of its 16 cell battery pack this UPS provides a lot of back up runtime after power failure. It also filters and conditions the power, providing a true sine wave power source to your equipment or computers. The Battery system is 48VDC.
We also thoroughly test and refurbish the unit. Cosmetic condition will be good with minor signs of previous use. Functionally the UPS will be perfect and ready for immediate use. We test thoroughly as part of the refurbishment process and you will be able to see from our feedback that we are dependable in this regard. Heavy and extended load simulations are performed. For peace of mind its worth remembering that the UPS comes with a 12 month RTB warranty.
1x R3000h UPS
1x new cells installed into the above by us.
1x input lead
2x output lead
This is everything you need to use the UPS immediately. We may have rails in from time to time, ask us if you need these. The UPS can be stood on its side (ensure fan exhaust ports are clear and oriented upwards) or left flat on the floor for unusual installations.
Shipping on syrofoam and bubble wrap, strapped to a presswood pallet. Courier insured 24HR With TNT who we have found to be dependable shipping partners. As the item is heavy please be prepared to help the driver unload at your end. VAT is included in the buy it now price.
9x output sockets - in 3x independantly fused banks.
208, 210, 220, 240 Volt 50/60hz auto sense input
Output regulation +/-8% of nominal voltage
Online efficienct 96%
Pure sinewave - less than 3% distortion with linear load
Surge suppression of 6500A
MOV and line filter for noise filtering
Runtime at 3000VA approx 10 minutes
483 x 133 x 56 mm
45dBA noise level
We have the full PDF manual for this unit - can email on request after purchase.
[information received from a past customer on how to connect to his server]
Thanks for your link with a bit of effort I have the UPS communicating nicely with my server …..
I made up a cable
UPS DB-9M DB-9F RS-232
Receive 1 <---------------------------< 3 TxD
Transmit 2 <---------------------------< 2 RxD
Common 4 <---------------------------< 5 SG
PnP_En 6 <---------------------------< 7
I downloaded http://powerquality.eaton.com/Support/Software-Drivers/Downloads/lansafe5.asp
UPSdriver_222.exe for x64 Windows
Lansafe 513 for Windows Winx64
I set the serial communications on Com1 to 1200 8 1 none
Loaded the driver onto my Server 2008 R2 x64 system
Then loaded the Lansafe software
And my UPS is now working with the server fully !
No customer reviews for the moment.