No products
Prices are tax included
Other
Other There are 58 products.
Items that are used in connection of UPS. For example network cards, communication leads, rail sets, and electrical connection cables.
Subcategories
-
Add on battery packs
Cell packs that can be connected to UPS to increase their runtime.
-
Automatic Voltage...
Regulates input voltages. Usually inductor based which gives mains isolation.
-
Front plastics
Front Plastic / Fascia for UPS
-
Network Cards
Lan cards for various UPS.
-
Modules
Various modules for UPS, example Power and Battery Modules
-
PDU
Power Distribution Units
-
Collection
Services for collections
-
Rackmount Rails
Rails for securing rack UPS in Racking systems.
-
Pedestal UPS
Pedestal UPS for use on the floor / under desks. Often have wall mount holes.
-
Software
UPS related software / tools
-
ATS
Automatic Transfer Switches
-
£ 16.30 In Stock940-0020B - APC 2-Metre Interface Cable
Condition: UsedOriginal APC 940-0020B Interface cable.Circa 2m long.
£ 16.30In Stock -
£ 26.08 In Stock940-0024E - APC 2-Metre SMART-UPS...
Condition: UsedOriginal APC 940-0024E SMART-UPS Signaling Interface Cable.Circa 2m long.
£ 26.08In Stock -
£ 24.45 In Stock940-0103 - Original APC 2-Metre Data...
Condition: UsedOriginal APC 940-0103 data transfer cable.Circa 2m long.
£ 24.45In Stock -
£ 27.17 In Stock940-0266 APC 2-metre Serial to RJ45...
Condition: UsedOriginal APC 940-0266 RJ47 to serial communications cable.Circa 2m long.
£ 27.17In Stock -
£ 19.56 In Stock940-0299A Comms cable / serial
Jack to serial comms cable circa 2m long Used with AP9630 and AP9631 cards also SRT type UPS with inbuilt 963x class network interfaces.
£ 19.56In Stock -
£ 17.97 In Stock -
£ 28.80 In Stock940-1524D Original APC 4.5 Metre SMART-UPS...
Condition: UsedOriginal APC 940-1524D SMART-UPS Signaling Interface Cable.Circa 2m long.
£ 28.80In Stock -
£ 190.00 In StockAP7721 ATS
Automatic transfer switch - C13 input/outputs - 1400VA Used, but tested and fully working. Reset to manufacturers defaults by us.
£ 190.00In Stock -
AP7723 ATS
Automatic transfer switch - C13 input/outputs 20A max power 2x C19/20 input sockets Used, but tested and fully working. Reset to manufacturers defaults by us.
£ 210.00In Stock -
£ 311.52 In StockAP7724 ATS
Automatic transfer switch - C13 input/outputs. Max power 32A - 6000VA 2U type Used, but tested and fully working. Reset to manufacturers defaults by us.
£ 311.52In Stock -
£ 146.30 In StockAP7822
2U PDU, fully tested and working. We reset the PDU to manufacturers defaults. They are set to assign an IP via DHCP / BootP handshake.The username and passwords are reset to known values. 1x IEC309-32A (large blue commando plugs) input. Single Phase12x IEC C13/15 (small kettle / d-plug sockets) as output.4x IEC19/20 (large square) output sockets 2x...
£ 146.30In Stock -
£ 166.28 In StockAP7854 PDU
Input socket is an IEC309-16A type 20x C13 output sockets4x C19 output sockets Reset to defaults (username and password apc/apc) Note the Zero-U mounting Pips and Cable tidy L-brackets are not included as standard. If we have any in stock we can supply free of charge at customer request. 12m RTB warranty
£ 166.28In Stock -
£ 254.54 In StockAP7920
AP7920 masterswitch PDU with power control to its outlets (switchable via web/http)
£ 254.54In Stock -
£ 255.40 In StockAP7921
AP7921 masterswitch PDU with power control to its outlets (switchable via web/http) Reset login credentials to apc/apc Reset IP assignemt to DHCP. Email us if you want us to set a static IP instead.
£ 255.40In Stock -
£ 282.15 In StockAP8981 PDU 3 Phase
Zerou PDU - 3 Phase 11KW max power As these are masterswitches, you can turn off / on individual sockets on the PDU strip via the web interface. We reset this interface to the default (apc/apc) username and password, and to handhake with a DHCP server for an IP. User Configurable start up and load shed plan to give priority to the most critical devices....
£ 282.15In Stock -
£ 71.89 In StockAP9215RM Control Panel
AP9215 Control panel - used - fully working. We have some brackets - email to check if you need one.
£ 71.89In Stock -
£ 45.00 In Stock -
£ 73.15 In StockAP9335TH Temp Probe
This APC Temperature and Humidity Sensor is a Universal sensor that monitors temperature and humidity inyour Data Center or Network Closet. IT has an RJ-45 connector. The cord length is 3.9m. Supplied fully working with 12-month RTB warranty.
£ 73.15In Stock -
£ 41.94 In Stock -
£ 12.54 In Stock -
£ 543.40 In Stock -
£ 248.19 In StockAPC AP7821 Metered PDU
1U Metered PDUFully working12m RTB warrantyWeb interface and front of PDU LCD display shows the total load. Individual load and statistics available via the web interface.
£ 248.19In Stock -
£ 180.00 In StockAPC AP8953 Gen 2 Masterswitch PDU - ZeroU...
Masterswitch PDU - individual sockets can be powered on an off. Generation 2 - LCD control panel. Input socket is an IEC309-32A type 21x C13 output sockets3x C19 output sockets Reset to defaults (username and password apc/apc) 12m RTB warranty
£ 180.00In Stock -
APC AP8959eu3 Gen 2 Masterswitch PDU
Zero "U" masterswitch PDU with LAN / SNMP management. This is a generation 2 device with the blue LCD screen, fully tested and working with 12-month RTB warranty.
£ 180.00In Stock -
£ 43.47 In StockAPC AP9568 Simple PDU
APC AP9560, 10 amp, zero-U PDU.This is a simple PDU which distributes power from its 1x C19 input socket, to 15x IEC13 -13 amp sockets. The total power for the PDU is 10 Amps. It is designed for Zero U (vertical) mounting in a rack cabinet, but this is not necessary; it can be used a a simple distribution block on a shelf or on the floor.
£ 43.47In Stock -
£ 57.48 In StockAPC AP9568 Simple PDU - New in Box
New AP9560, 10 amp, zero-U PDU, brand new in original manufacturer's (APC) box.This is a simple PDU which distributes power from its 1x C1c input socket, to 15x IEC13 -13 amp sockets. Includes1x 9568 PDU(with the APC zero-u pips for APC racks)1x pair L- brackets for mounting in other racks1x C13-c14 cable The input is C13/14the outputs (15x) c13/14
£ 57.48In Stock -
APC BR24BPG Extended Runtime Module New in...
APC BR24 extended runtime module for APC BR1500GI and BR1200GI UPS.These extended runtime modules are new, unused and supplied in the original manufacturer's box.We have fitted brand new cells and meter-tested the units at the connector.They are ready to install on delivery and carry our 12-month RTB warranty.
£ 180.00In Stock -
£ 149.77 In StockBypass Panel 10KVA
Used but good 10KVA bypass panel. Manual Switchgear 12m RTB warranty
£ 149.77In Stock -
£ 111.51 In StockBypass Panel 16KVA SBP16KP
Used but good 16KVA bypass panel. Manual Switchgear Has hard wired outputs 12m RTB warranty
£ 111.51In Stock -
£ 8.39 In StockC13 to 1x UK3 socket
Power adapter - single c13 to 1x UK3 socket for your device. This lets you connect normal UK plugs to your UPS.
£ 8.39In Stock -
£ 13.18 In StockC13 to 4x UK3 socket
Power adapter - single c13 to 4x UK3 sockets for your devices. This lets you connect 4x normal UK plugs to your UPS.
£ 13.18In Stock -
£ 2.16 In Stock -
£ 7.33 In StockC19 Power lead
C19 1.8M C19 (large square) female 16 amp connector on one end - normally plugged into UPS. UK Wall plug (3 pin / 13A fused) on the other end.
£ 7.33In Stock -
£ 6.27 In StockC19-C20 hot to cold lead 16A
16A lead for plugging devices into your UPS Male to Female
£ 6.27In Stock -
£ 12.54 In StockCharger - Large
12V Battery charger Size: Large Battery voltage: 12v Charge current: 3.24A Recommended Battery capacity range: 15AH to 25AH Battery topology: Lead acid. Liquid, AGM and Gel compatible. Input voltage 100-240V (UK normal plug and utility voltage) Double indicator LED lights Use with small 12V cells. Fully tested with Our RT12170 / RT12180 / RT12220EV /...
£ 12.54In Stock -
£ 10.45 In StockCharger - Medium
12V Battery charger Size: Medium Battery voltage: 12v Charge current: 1.23A Recommended Battery capacity range: 7AH to 12AH Battery topology: Lead acid. Liquid, AGM and Gel compatible. Input voltage 100-240V (UK normal plug and utility voltage) Use with small 12V cells. Fully tested with Our RT1272 RT1290 RT12120 RT12120EV.
£ 10.45In Stock -
£ 7.32 In StockCharger - Small
12V Battery charger Size: Small Battery voltage: 12v Charge current: .65A Battery capacity: 4AH to 6AH Battery topology: Lead acid. Liquid, AGM and Gel compatible. Input voltage 100-240V (UK normal plug and utility voltage) Use with small 12V cells. Fully tested with Our RT1245, RT1250 RT1255.
£ 7.32In Stock -
£ 46.73 In StockDell H910n / 0H910P card
H910 networking card TLS problem fixed, and ready for use Flashed with latest firmware You will find the manual for the networkMS card in the download section - its not the exact manual for this card, but we cant find the Dell one, and the network MS is similar so may be of some use.
£ 46.73In Stock -
£ 5.43 In StockFirmware Flash for APC 96xx cards
Flash to new firmware on APC cards. Charge is per card. AP9617AP9618AP9619 AP9630AP9631 AP9640AP9641AP9643 Must be ordered at the same time as a card, and we only offer this on cards bought from us.
£ 5.43In Stock -
£ 5.43 In StockFirmware Flash for HP AF401a cards
Flash to new firmware on APC cards. Charge is per card. Must be ordered at the same time as a card, and we only offer this on cards bought from us. The HP AF401a had some tricky issues with dates - they can be used without flashing but the firmwre flash fixes various issues.
£ 5.43In Stock -
£ 8.69 In StockFirmware Flash for SMT and SMC range UPS
APC have released a few firmware revisions on the UPS. No major functionality has changed but it has added support for example connecting to certain NAS and backlight dimming of the LCD panel.
£ 8.69In Stock -
£ 10.45 In StockHP EO4504 PDU
A simple 16a PDU power distribution unit made by Hewlett Packard. P/N 228481-006 417583-001. The unit is shown in the photographs with rack-mount ears, but these aren't always available. Please email in advance of ordering if you must have ears. If out of stock, we may supply different ears to those shown, often custom-made from aluminium extrusions.
£ 10.45In Stock -
£ 17.97 In StockIEC 309- 16Amp to C19
IEC309 male (to plug into the wall power) c19 Female (to plug into the UPS)
£ 17.97In Stock -
£ 85.00 In StockMGE STS16 C19/20
Automatic transfer switch 2x IEC C19/20 inputs 1x IEC19/20 output6x IEC13/14 output Alarm silence buttonSelectable preferred source (front button)
£ 85.00In Stock -
£ 151.53 In StockMGE STS16 IEC309
Automatic transfer switch - IC309 16A inputs + C13/C19 outputs 3000VA. If you need alternative input connectors, email us. We can replace the original IEC309.
£ 151.53In Stock -
£ 480.70 In StockNetbotz 570
APC Netbotz 570 rack camera and sensor monitor.Reset to defaults (login with apc/apc) and DHCP handshake for IP Fully working.
£ 480.70In Stock -
£ 135.85 In StockOlson 32A ATS
32A automatic transfer switch with inbuilt LED readout.Fully tested and working.Includes 12 month RTB warranty.
£ 135.85In Stock -
£ 269.59 In StockR5500XR Electronics Module 407418-B31
We have stock of both the power modules and the UPS. So we can fully test them before we ship. Fully tested and fully working power module. We also have the UPS / Chassis / Cell packs. Inquire if needed. **30 day RTB Warranty with this item**
£ 269.59In Stock -
£ 282.15 In StockSYPM Symmetra Power Module
We have stock of both the power modules and the UPS. So we can fully test them before we ship. 90 Day RTB warranty Fully tested and fully working SYPM4 power module These are for the first generation Symmetra UPS which is a cream plastic shrouded unit as per the photos
£ 282.15In Stock -
£ 1,254.00 In StockSYPM10K16H Symmetra Power Module
Tested in a UPS. 90 Day RTB warranty. For use in the Symmetra PX UPS systems
£ 1,254.00In Stock -
£ 668.80 In StockSYPM10KH Symmetra Power Module
Tested in a UPS. 90 Day RTB warranty. For use in the Symmetra PX UPS systems
£ 668.80In Stock -
£ 625.00 In StockSYPM10KHQ Symmetra Power Module
Tested in a UPS. 90 Day RTB warranty. For use in the Symmetra PX UPS systems. Q revision - updated and backward compatible version of the standard SPYM10KH
£ 625.00In Stock -
£ 600.88 In StockSYPM4KI Symmetra Power Module
We have stock of both the power modules and the UPS. So we can fully test them before we ship. 90 Day RTB warranty Fully tested and fully working SYPM4Ki power module For use in the Gen2 Symmetra APC UPS systems
£ 600.88In Stock -
£ 339.63 In StockSYPM4KU Symmetra Power Module
We have stock of both the power modules and the UPS. So we can fully test them before we ship. 90 Day RTB warranty Fully tested and fully working SYPM4KU power module For use in the Gen2 Symmetra APC UPS systems
£ 339.63In Stock -
£ 353.46 In StockSYSW40KH Static Switch Module
Tested in a UPS. 90 Day RTB warranty. For use in the Symmetra PX UPS systems.
£ 353.46In Stock -
£ 1.00 In Stock£1 Adjustment / test item
Adjustment item to the value of £1. Useful if adding items to the order if we dont have them listed yet. Can be used in Multiples.
£ 1.00In Stock -
£ 10.00 In Stock£10 Adjustment / test item
Adjustment item to the value of £10 Useful if adding items to the order if we dont have them listed yet. Can be used in Multiples.
£ 10.00In Stock -
£ 100.00 In Stock£100 Adjustment / test item
Adjustment item to the value of £100 Useful if adding items to the order if we dont have them listed yet. Can be used in Multiples.
£ 100.00In Stock
